Welcome to the Harris Geospatial product documentation center. Here you will find reference guides, help documents, and product libraries.


  >  Docs Center  >  ENVI API  >  ENVI Classic Processing  >  ENVI_RXD_DOIT

ENVI_RXD_DOIT

ENVI_RXD_DOIT

This routine is obsolete and has been replaced with ENVIRXAnomalyDetectionTask.

Use this procedure to perform Reed-Xiaoli anomaly detection on a multispectral or hyperspectral image. Reed-Xiaoli Detector (RXD) is an unsupervised anomaly detection algorithm that detects the spectral or color differences between a region to be tested and its neighboring pixels or the entire dataset. Bright pixels in the output image represent targets that are spectrally distinct from the image background.

Syntax


ENVI_DOIT, 'ENVI_RXD_DOIT' [, DIMS=array], FID=file ID [, /IN_MEMORY] [, KERNEL_SIZE=integer] [, /LOCAL] [, M_FID=variable] [, M_POS=array] [, METHOD={0 | 1 | 2}] [, OUT_NAME=string] [, POS=array] [, R_FID=variable]

Keywords


DIMS (optional)

The “dimensions” keyword is a five-element array of long integers that defines the spatial subset (of a file or array) to use for processing. Nearly every time you specify the keyword FID, you must also specify the spatial subset of the corresponding file (even if the entire file, with no spatial subsetting, is to be processed).

  • DIMS[0]: A pointer to an open ROI; use only in cases where ROIs define the spatial subset. Otherwise, set to -1L.
  • DIMS[1]: The starting sample number. The first x pixel is 0.
  • DIMS[2]: The ending sample number
  • DIMS[3]: The starting line number. The first y pixel is 0.
  • DIMS[4]: The ending line number

To process an entire file (with no spatial subsetting), define DIMS as shown in the following code example. This example assumes you have already opened a file using ENVI_SELECT or ENVI_PICKFILE:

  envi_file_query, fid, dims=dims

FID

The file ID (FID) is a long-integer scalar with a value greater than 0. An invalid FID has a value of -1. The FID is provided as a named variable by any routine used to open or select a file. Often, the FID is returned from the keyword R_FID in the ENVIRasterToFID routine. Files are processed by referring to their FIDs. If you work directly with the file in IDL, the FID is not equivalent to a logical unit number (LUN).

IN_MEMORY (optional)

Set this keyword to specify that output should be stored in memory. If you do not set IN_MEMORY, output will be stored on disk and you must specify OUT_NAME (see below).

KERNEL_SIZE

Use this keyword to specify a square kernel size, in pixels, around a given pixel that will be used to create a mean spectrum. If you do not set the LOCAL keyword, this keyword is ignored. The minimum value is 1, and the maximum value is (ns - 1) < (nl - 1).

LOCAL (optional)

Set this keyword to use a local mean spectrum rather than a global mean spectrum (based on the entire dataset). If you set this keyword, you must specify the local kernel size using the KERNEL_SIZE keyword.

M_FID (optional)

Use this keyword to specify the file ID of the mask file. This value is returned from the keyword R_FID in the ENVI_OPEN_FILE procedure. M_FID is a long integer with a value greater than 0. An invalid file ID has a value of -1.

M_POS (optional)

Use this keyword to specify the band position of the mask band. M_POS is a long integer with a value greater than or equal to 0.

METHOD (optional)

Use this keyword to specify the specific anomaly detection algorithm to use. Set METHOD to one of the following values:

  • 0: RXD (default): Standard RXD algorithm
  • 1: UTD: Uniform Target Detector algorithm
  • 2: RXD-UTD: A hybrid of the RXD and UTD algorithms

See RX Anomaly Detection for the differences among these algorithms.

OUT_NAME (optional)

Use this keyword to specify a string with the output filename for the resulting data. If you set the keyword IN_MEMORY, you do not need to specify OUT_NAME.

POS (optional)

Use this keyword to specify an array of band positions, indicating the band numbers on which to perform the operation. This keyword indicates the spectral subset of bands to use in processing. POS is an array of long integers, ranging from 0 to the number of bands minus 1. Specify bands starting with zero (Band 1=0, Band 2=1, etc.) For example, to process only Bands 3 and 4 of a multi-band file, POS=[2, 3].

POS is typically used with individual files. The example code below illustrates the use of POS for a single file with four bands of data:

  pos=[0,1,2,3]
              
envi_doit, 'envi_stats_doit', dims=dims, fid=fid, pos=pos, $
              
comp_flag=3, dmin=dmin, dmax=dmax, mean=mean, stdv=stdv, hist=hist

But what if you need to create an output file consisting of data from different bands, each from different files? Library routines such as CF_DOIT and ENVI_LAYER_STACKING_DOIT can accomplish this, but they use the POS keyword differently. Suppose you have four files, test1, test2, test3, and test4, with corresponding FIDs of fid1, fid2, fid3, and fid4, respectively. In the following example, you want Band 3 from test1 in the first position, Band 2 from test2 in the second position, Band 6 from test3 in the third position, and Band 4 from test4 in the fourth position. The code should be as follows:

  fid_array = [fid1,fid2,fid3,fid4]
              
pos=[2,1,5,3]
              
envi_doit, 'cf_doit', dims=dims, fid=fid_array
              
out_name='test_composite_file'

R_FID (optional)

ENVI Classic library routines that result in new images also have an R_FID, or “returned FID.” This is simply a named variable containing the file ID to access the processed data. Specifying this keyword saves you the step of opening the new file from disk.



© 2018 Harris Geospatial Solutions, Inc. |  Legal
My Account    |    Store    |    Contact Us