Friday, December 02, 2016
These instructions describe how to install and configure the Flexera FlexNet license server for use with Harris Geospatial (Exelis VIS) products.
See the following:
Supported FlexNet License Server platforms:
Operating System
CPU Architecture
Tested with Operating System Versions
You need administrative privileges to perform the steps in this document.
By default, the license server is configured to communicate on local TCP/IP port 7070. If a firewall is deployed on the license server, you will need to configure the firewall to allow inbound connections by the license server machine on TCP port 7070.
The program that runs the FlexNet License Server service is prunsrv.exe, located in the INSTALL‑DIR\flexnetls-x64_windows-xxxx.xx.x\server directory.
prunsrv.exe
INSTALL‑DIR\flexnetls-x64_windows-xxxx.xx.x\server
If needed, consult your local system or network administrator for assistance in configuring your server's firewall.
To allow proper communication, the system time and date of both the license server and the license client computer should be configured to accurately reflect the current time and date.
If you need assistance, visit the Request Technical Support page at https://www.harrisgeospatial.com/Support.aspx.
Start the installer:
Web download: Navigate to the flexnetserverxxxx.xx-win.exe file that was downloaded to your computer and run it, where xxxx.xx is the release date of the FlexNet server software.
flexnetserverxxxx.xx-win.exe
xxxx.xx
Note: The License Server installer is available only as a separate product download file. It is not included as part of other Harris Geospatial product downloads.
flexnet-license_server
setup-flexnetls-win.exe
Activating a license transfers the license rights from the Harris Download and Licensing Center to a node-locked (local) computer or license server and creates the features and quantities of licenses that enable the software to run. When you purchase Harris Geospatial products, you will receive an email with an activation code to use to activate your software license. The license is a concurrent-process license for each product that was purchased.
These instructions describe how to activate your licenses on a license server using the activation codes provided in your product order email. Clients will then create a connection to the license server to acquire those licenses when they launch their application. If a client attempts to launch the application before licenses are activated on the license server, or before the client has a connection to the license server, they will receive an error message.
In this document, you will activate licenses over the Internet. If you do not have Internet access, contact Technical Support to receive separate instructions to activate your licenses offline.
The steps that follow describe how to use the Harris License Administrator tool to:
To perform these same functions from the command line instead of the Harris License Administrator tool, see Activate Licenses from the Command Line for details.
The steps that follow use the Harris License Administrator tool. If the tool is not already open, access it from the Start menu by selecting Tools > Harris License Administrator under the shortcut group for your product installation. Administrator privileges are required.
To activate licenses on the license server:
Licenses remain activated on a license server until you deactivate them. Deactivating a license returns it to the Harris Download and Licensing Center. Deactivated licenses can then be used on another license server. For example, if you receive a new computer and you want to install the license server service on it, first deactivate the licenses from the old license server. If you do not deactivate the licenses (and the old computer is no longer accessible to you), you will be unable to activate them on the new license server. If that occurs, Technical Support will need to deactivate the licenses for you.
To deactivate licenses on the server:
A client computer can connect to only one license server at a time; however, a client can use a combination of node-locked licenses activated locally on the computer and served licenses from a connected license server.
To connect a client to a license server:
To disconnect a client computer from a license server:
Client computers can optionally borrow licenses from a license server. Borrowing licenses activates them locally to the client computer, for a limited time. One example of borrowing is when you need to work in a remote region for one week and will be unable to connect to the license server to acquire licenses. In this case, you borrow the needed licenses for a week; then when the specified time has expired, the licenses will be automatically returned to the license server.
To borrow licenses from a license server:
Borrowed licenses are automatically returned to the license server at the end of the specified period, but you can return all of the licenses earlier.
To return licenses on a server:
Click View Licenses in the Harris License Administrator tool to view license details and features for the license server. License names, activation codes, and maintenance IDs available to the license server will be listed in a table. To refresh the data in the table, click the refresh icon.
To view feature details for the licenses, select one or more table rows and enable the Show feature details check box. Select all table rows to show all licenses. To filter the details further to show only in-use features, enable the Show in-use only check box.
In the feature details Expiration column:
Permanent
You can copy the details of all features to the clipboard, or save them to a .json file.
.json
To view the license activity log for the computer, or to view device information for the computer, click View Log.
The steps that follow describe how to:
These steps have you activate licenses over the Internet. If you do not have Internet access, contact Technical Support for separate instructions to activate your license offline.
You can also activate the licenses from the command line:
Go to the INSTALL_DIR\flexnetls-x64_windows-xxxx.xx.x\enterprise directory, for example:
INSTALL_DIR\flexnetls-x64_windows-xxxx.xx.x\enterprise
C:\Program Files\Harris\flexnetls-x64_windows-xxxx.xx.x\enterprise
Activate the licensing capabilities on the server, for example:
flexnetlsadmin.bat ‑server http://server:port ‑activate ‑id xxxx‑xxxx‑xxxx‑xxxx ‑count quantity
Example:
flexnetlsadmin.bat ‑server http://localhost:7070 ‑activate ‑id AAAA‑BBBB‑CCCC‑DDDD ‑count 3
Where:
‑server
localhost
‑activate
id
‑id
‑count
To view details on the activated licenses for the license server, see View Licenses and Feature Details for commands.
Specifying a ‑count of 0 deactivates the specified licenses on the license server. For example:
flexnetlsadmin.bat ‑server http://localhost:7070 ‑activate ‑id AAAA‑BBBB‑CCCC‑DDDD ‑count 0
Create a plain text file on the client computer to reference the license server. Perform the following steps:
Create a plain text file that contains a reference to the license server URL. Format the text as follows:
http://[license‑server‑hostname‑or‑IP‑address]:7070/fne/bin/capability
For example:
http://myserver.mycompany.com:7070/fne/bin/capability
o_licenseserverurl.txt
Copy the file to the license subdirectory located under your Harris installation directory. The file should have read privileges for all product users.
license
Examples using the default locations:
Windows: C:\Program Files\Harris\license\o_licenseserverurl.txt
C:\Program Files\Harris\license\o_licenseserverurl.txt
Linux: /usr/local/harris/license/o_licenseserverurl.txt
/usr/local/harris/license/o_licenseserverurl.txt
Mac: /Applications/harris/license/o_licenseserverurl.txt
/Applications/harris/license/o_licenseserverurl.txt
To view details on served licenses for the computer, see View Licenses and Feature Details for commands.
To remove the client computer's connection to the license server, delete the o_licenseserverurl.txt from the license subdirectory located under your Harris installation directory.
For the steps in the next section, you will find the activate utility in the following directories:
activate
INSTALL_DIR\IDLxx\license_utils\bin.x86_64
INSTALL_DIR\IDLxx
INSTALL_DIR\ENVIxx\IDLxx\license_utils\bin.x86_64
INSTALL_DIR\ENVIxx\IDLxx
INSTALL_DIR/idlxx/license_utils/bin.x86_64
INSTALL_DIR/idlxx
INSTALL_DIR/envixx/idlxx/license_utils/bin.x86_64
INSTALL_DIR/envixx/idlxx
Use the activate utility to borrow licenses from a license server for a period of time.
To borrow licenses, open a command or terminal window on the client, change to the directory that contains the activate utility, and type the following at the command line:
Windows:
activate.exe ‑a activation-code ‑s serverName:serverPort ‑t seconds
activate.exe ‑a AAAA-BBBB-CCCC-DDDD ‑s LicenseServer:7070 ‑t 86400
Linux and Mac:
./activate ‑a activation-code ‑s serverName:serverPort ‑t seconds
./activate ‑a AAAA-BBBB-CCCC-DDDD ‑s LicenseServer:7070 ‑t 86400
‑a
‑s
‑t
The following are also valid command-line arguments for borrowing with activate:
‑b
‑c
-b
‑g
To view details on borrowed licenses for the computer, see View Licenses and Feature Details for commands.
Use the activate utility to return borrowed licenses before their expiration date.
To return borrowed licenses, open a command or terminal window, change to the directory that contains the activate utility, and type the following at the command line:
activate ‑r ‑s serverName:serverPort
activate ‑r ‑s LicenseServer:7070
./activate ‑r ‑s serverName:serverPort
./activate ‑r ‑s LicenseServer:7070
‑r
This section provides commands to administer and uninstall the license server service. See the following:
To view details on licensed features, open a command window change directories to INSTALL_DIR\flexnetls-x64_windows-xxxx.xx.x\enterprise. From a command line, use the following commands:
Confirm the service is running and listening on the port:
flexnetlsadmin.bat ‑server http://localhost:7070 ‑status
Display a summary of license features/capabilities enabled on the license server running on the local host computer:
flexnetlsadmin.bat ‑server http://localhost:7070 ‑features
Display a listing of license features/capabilities enabled on the specified license server:
flexnetlsadmin.bat ‑server http://myserver.mycompany.com:7070 ‑licenses
Display a verbose listing of license features and capabilities enabled on the specified license server, using an IP address:
flexnetlsadmin.bat ‑server http://123.456.789.10:7070 ‑licenses ‑verbose
Perform the following tasks from the Windows Control Panel.
Start the license server service:
In the Services tab, right-click FNLS-idl_lmgrd (FlexNet Licensing Server - idl_lmgrd) and select Start Service.
Stop the license server service:
In the Services tab, right-click FNLS-idl_lmgrd (FlexNet Licensing Server - idl_lmgrd) and select Stop Service.
The default location of the service log files:
C:\Windows\ServiceProfiles\NetworkService\flexnetls\idl_lmgrd\logs
© 2016 Exelis Visual Information Solutions, Inc., a subsidiary of Harris Corporation. All Rights Reserved. This information is not subject to the controls of the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). However, this information may be restricted from transfer to various embargoed countries under U.S. laws and regulations.
(Written by DB 12/6/2016)
Number of views (513)/Comments (0)
Below is a quick start guide to follow to download and activate your ENVI 5.4 and/or IDL 8.6 software once ... more »
Sign Up for News & Updates: Stay informed with the latest news, events, technologies and special offers.