34517 Rate this article: 3.8 Radiance vs. Reflectance What is the difference between radiance and reflectance? Radiance is the variable directly measured by remote sensing instruments. Basically, you can think of radiance as how much light the instrument "sees" from the object being observed. When looking through an atmosphere, some light scattered by the atmosphere will be seen by the instrument and included in the observed radiance of the target. An atmosphere will also absorb light, which will decrease the observed radiance. Radiance most often has units of watt/(steradian/square meter). Reflectance is the ratio of the amount of light leaving a target to the amount of light striking the target. It has no units. If all of the light leaving the target is intercepted for the measurement of reflectance, the result is called "hemispherical reflectance." Reflectance (or more specifically hemispherical reflectance) is a property of the material being observed. Radiance, on the other hand, depends on the illumination (both its intensity and direction), the orientation and position of the target and the path of the light through the atmophere. With effort, many of the atmospheric effects and the solar illumination can be compensated for in remote sensing data. This yields something which is called "apparent reflectance," and it differs from true reflectance in that shadows and directional effects on reflectance have not been dealt with. Many people refer to this as "reflectance." For many applications, radiance, reflectance, and apparent reflectance can be used interchangibly. However, since reflectance is a property of the target material itself, you will get the most reliable (and repeatable) vegetation index values using reflectance. Apparent reflectance is adequate in many cases. _________________________________________________________________ Information from "A FAQ on Vegetation in Remote Sensing" by Terrill W. Ray Div. of Geological and Planetary Sciences California Institute of Technology Review on 12/31/2013 MM Please login or register to post comments. How ENVI selects pixels within an ROI How do I create class vector layers from points generated in ENVI's Generate Random Sample tool?