Welcome to the Harris Geospatial product documentation center. Here you will find reference guides, help documents, and product libraries.


Harris Geospatial / Docs Center / ENVI API / ENVI Classic Processing / ENVI_PC_SHARPEN_DOIT

ENVI_PC_SHARPEN_DOIT

ENVI_PC_SHARPEN_DOIT

This routine has been replaced by ENVIPCPanSharpeningTask.

This procedure computes principal components spectral sharpening, which sharpens a low spatial resolution multispectral image using an associated high spatial resolution panchromatic band. The algorithm assumes that the low spatial resolution spectral bands correspond to the high spatial resolution panchromatic band. These two datasets are coregistered on the fly if they are both georeferenced.

Syntax


ENVI_DOIT, 'ENVI_PC_SHARPEN_DOIT', DIMS=array, FID=file ID, HIRES_DIMS=array, HIRES_FID=file ID, HIRES_POS=array [, /IN_MEMORY] [, INTERP={0 | 1 | 2}] [, M_FID=file ID] [, M_POS=array] [, MASK_VALUE=value] [, OUT_BNAME=string array], OUT_NAME=string, POS=array [, R_FID=file ID]

Keywords


DIMS

The “dimensions” keyword is a five-element array of long integers that defines the spatial subset (of a file or array) to use for processing. Nearly every time you specify the keyword FID, you must also specify the spatial subset of the corresponding file (even if the entire file, with no spatial subsetting, is to be processed).

  • DIMS[0]: A pointer to an open ROI; use only in cases where ROIs define the spatial subset. Otherwise, set to -1L.
  • DIMS[1]: The starting sample number. The first x pixel is 0.
  • DIMS[2]: The ending sample number
  • DIMS[3]: The starting line number. The first y pixel is 0.
  • DIMS[4]: The ending line number

To process an entire file (with no spatial subsetting), define DIMS as shown in the following code example. This example assumes you have already opened a file using ENVI_SELECT or ENVI_PICKFILE:

  envi_file_query, fid, dims=dims

FID

The file ID (FID) is a long-integer scalar with a value greater than 0. An invalid FID has a value of -1. The FID is provided as a named variable by any routine used to open or select a file. Often, the FID is returned from the keyword R_FID in the ENVIRasterToFID routine. Files are processed by referring to their FIDs. If you work directly with the file in IDL, the FID is not equivalent to a logical unit number (LUN).

HIRES_DIMS

Use this keyword to specify the spatial dimensions of the high spatial resolution panchromatic band. HIRES_DIMS is a five-element array of long integers with the following definitions:

  • HIRES_DIMS[0]: A pointer to an open ROI; use only in cases where ROIs define the spatial subset. Otherwise, set to -1L.
  • HIRES_DIMS[1]: The starting sample number. The first x pixel is 0.
  • HIRES_DIMS[2]: The ending sample number
  • HIRES_DIMS[3]: The starting line number. The first y pixel is 0.
  • HIRES_DIMS[4]: The ending line number

HIRES_FID

Use this keyword to specify the file ID for the high spatial resolution panchromatic file. This value is returned from the keyword R_FID in the ENVI_OPEN_FILE procedure. HIRES_FID is a long integer with a value greater than 0. An invalid file ID has a value of -1.

HIRES_POS

Use this keyword to specify the band position of the high spatial resolution panchromatic band. HIRES_POS is an array of long integers, ranging from 0 to the number of bands minus 1.

IN_MEMORY (optional)

Set this keyword to specify that output should be stored in memory. If you do not set IN_MEMORY, output will be stored on disk and you must specify OUT_NAME (see below).

INTERP (optional)

Set this keyword to one of the following values to specify the resampling method.

  • 0: Nearest neighbor
  • 1: Bilinear interpolation
  • 2: Cubic convolution

The low spatial resolution images are resampled to the high resolution space using the specified resampling method. The default method is nearest neighbor.

M_FID (optional)

Use this keyword to specify the file ID of the mask file. This value is returned from the keyword R_FID in the ENVI_OPEN_FILE procedure. M_FID is a long integer with a value greater than 0. An invalid file ID has a value of -1.

M_POS (optional)

Use this keyword to specify the band position of the mask band. M_POS is a long integer with a value greater than or equal to 0.

MASK_VALUE (optional)

Use this keyword to specify the output value for the masked pixels. Only use MASK_VALUE when you specify M_FID and M_POS. The default value is 0.

OUT_BNAME (optional)

Use this keyword to specify a string array of output band names.

OUT_NAME

Use this keyword to specify a string with the output filename for the resulting data. If you set the keyword IN_MEMORY, you do not need to specify OUT_NAME.

POS

Use this keyword to specify an array of band positions, indicating the band numbers on which to perform the operation. This keyword indicates the spectral subset of bands to use in processing. POS is an array of long integers, ranging from 0 to the number of bands minus 1. Specify bands starting with zero (Band 1=0, Band 2=1, etc.) For example, to process only Bands 3 and 4 of a multi-band file, POS=[2, 3].

POS is typically used with individual files. The example code below illustrates the use of POS for a single file with four bands of data:

  pos=[0,1,2,3]
              
envi_doit, 'envi_stats_doit', dims=dims, fid=fid, pos=pos, $
              
comp_flag=3, dmin=dmin, dmax=dmax, mean=mean, stdv=stdv, hist=hist

But what if you need to create an output file consisting of data from different bands, each from different files? Library routines such as CF_DOIT and ENVI_LAYER_STACKING_DOIT can accomplish this, but they use the POS keyword differently. Suppose you have four files, test1, test2, test3, and test4, with corresponding FIDs of fid1, fid2, fid3, and fid4, respectively. In the following example, you want Band 3 from test1 in the first position, Band 2 from test2 in the second position, Band 6 from test3 in the third position, and Band 4 from test4 in the fourth position. The code should be as follows:

  fid_array = [fid1,fid2,fid3,fid4]
              
pos=[2,1,5,3]
              
envi_doit, 'cf_doit', dims=dims, fid=fid_array
              
out_name='test_composite_file'

R_FID (optional)

ENVI Classic library routines that result in new images also have an R_FID, or “returned FID.” This is simply a named variable containing the file ID to access the processed data. Specifying this keyword saves you the step of opening the new file from disk.



© 2017 Exelis Visual Information Solutions, Inc. |  Legal
My Account    |    Buy    |    Contact Us