>  Docs Center  >  Libraries  >  JHU/APL/S1R  >  IMGRECPOL

IMGRECPOL

IMGRECPOL

Name


      IMGRECPOL

Purpose


      Map an X/Y image to an angle/radius image.

Category


Calling Sequence


      ar = imgrecpol(xy, x1, x2, y1, y2, a1, a2, da, r1, r2, dr)

Inputs


      xy = X/Y image. in
      x1, x2 = start and end x in xy. in
      y1, y2 = start and end y in xy. in
      a1, a2, da = start ang, end ang, ang step (deg). in
      r1, r2, dr = start radius, end radius, radius step. in

Keyword Parameters


Keywords


        /BILINEAR does bilinear interpolation,
          else nearest neighbor is used.
        /MASK masks values outside image to 0.

Outputs


      ar = returned angle/radius image. out
        Angle is in x direction, and radius is in y direction.

Common Blocks


Notes


      Notes: Angle is 0 along + X axis and increases CCW.

Modification History


      R. Sterner. 11 July, 1986.
      R. Sterner, 4 Sep, 1991 --- converted to IDL vers 2.
      R. Sterner, 5 Sep, 1991 --- simplified and added bilinear interp.
      Johns Hopkins Applied Physics Lab.
  Copyright (C) 1986, Johns Hopkins University/Applied Physics Laboratory
  This software may be used, copied, or redistributed as long as it is not
  sold and this copyright notice is reproduced on each copy made. This
  routine is provided as is without any express or implied warranties
  whatsoever. Other limitations apply as described in the file disclaimer.txt.



© 2019 Harris Geospatial Solutions, Inc. |  Legal
My Account    |    Store    |    Contact Us