>  Docs Center  >  Libraries  >  JHU/APL/S1R  >  POS_CM

POS_CM

POS_CM

Name


      POS_CM

Purpose


      Convert keyword POSITION for PLOT from cm to norm. coords.

Category


Calling Sequence


      out = pos_cm(in)

Inputs


      in = the array [x1,y1,x2,y2] in
          where (x1,y1) = lower left corner,
          and (x2,y2) = upper right corner of plot area in cm.

Keyword Parameters


Outputs


      out = normalized coordinates. out

Common Blocks


Notes


      Note: if used to convert the position array before call
        to plot, be sure plot device is set first.
        For PostScript plots call psinit first.

Modification History


      R. Sterner, 22 Sep, 1989
  Copyright (C) 1989, Johns Hopkins University/Applied Physics Laboratory
  This software may be used, copied, or redistributed as long as it is not
  sold and this copyright notice is reproduced on each copy made. This
  routine is provided as is without any express or implied warranties
  whatsoever. Other limitations apply as described in the file disclaimer.txt.



© 2019 Harris Geospatial Solutions, Inc. |  Legal
My Account    |    Store    |    Contact Us