Set Preferences
To set preferences for ENVI LiDAR, select File > Preferences from the menu bar. Click OK for the new settings to take effect. To return all preferences to their default settings, click Reset.
The following preference settings are available:
|
Preference |
Description |
|
Load Last Project at Startup
|
Enable or disable automatically loading the project open in the previous ENVI LiDAR session. This check box is disabled by default.
|
|
Show Splash Screen at Startup
|
Enable or disable showing the splash screen at application startup. This check box is disabled by default.
|
|
Show Detailed Reports
|
Enable or disable showing a detailed report used for debugging in the Operations Log. This check box is disabled by default.
|
|
After Processing Enter into QA Mode
|
Enable or disable automatically switching the Main window view into QA Mode when processing is complete. This check box is enabled by default.
|
|
QA Grid Size
|
Sets the size of each block during QA. The maximum setting is 500x500 meters. Smaller rectangles provide faster response time for processing. The default is 150x150.
|
|
Classified Data Colors
|
Sets the display colors of the classified point layers. Click the Color buttons to select a different.
|
|
Render Preferences
|
Sets the display colors for markers, cross section line, selected color, precision marker, and the background color of the Main window.
|
|
Main Window Point Size
|
Sets the display size of the points in the Main window.
|
|
Cross Section Window Point Size
|
Sets the display size of the points in the cross section window. The default is Large.
|
|
Line Width
|
Sets the width of the displayed vector lines. The default is 2.
|
|
Use Terrain Texture for Roofs
|
Enable or disable using the building roof color from the LiDAR intensity or RGB in this location. When disabled, a default color is used on roofs. This check box is enabled by default.
|